The Eaton 93E: simply effective
The Eaton 93E UPS delivers simply effective power protection for ever-expanding loads in today’s spaceconstrained data centres. Facilitating a lower total cost of ownership (TCO) through a combination of energyefficiency, high reliability and a compact footprint the 93E is an ideal solution for small – to medium – sized data centres and other applications desiring highly reliable power protection.
Eaton 93E UPS Technical Specifications
| Power | ||
| Ratings | 15kVA/13.5kW | 20kVA/18kW |
| 30kVA/27kW | 40kVA/36kW | |
| 60kVA/54kW | 80kVA/72kW | |
| 100kVA/90kW | 120kVA/108kW | |
| 160kVA/144kW | 200kVA/180kW | |
| Topology | Double-conversion online UPS | |
| Operating frequency | 50/60 Hz (40 to 72 Hz) | |
| Input power factor | >0.99 typical | |
| Input current distortion | 5% THD | |
| Electrical input | ||
| Nominal input voltage | 400/230V, 4 wire (380/415V selectable) | |
| Input voltage range | -15%, +20% from nominal (400V) at 100% load without depleting battery | |
| Electrical output | ||
| Nominal output voltage | 400/230, 4 wire (380/415V selectable) | |
| Output voltage regulation | ±1% Static; <5% dynamic at 100% resistive load change, <20 ms response time | |
| Battery | ||
| Battery | 192 to 240 Cells (Continual selectable for 15-80kVA) 216/222/228/234/240 Cells (Selectable for 100-200kVA) | |
| Charging method | ABM Cyclic Charging | |
| General | ||
| Efficiency | >98% High-efficiency mode (15-80kVA) >98.5% High-efficiency mode (100-200kVA) >94% Double conversion mode (15-200kVA) | |
| Overload | 150% for 1 minute, 125% for 10 minutes, >150% for 150ms | |
| UPS bypass | Automatic on overload or UPS failure | |
| Parallel technology | Powerware Hot Sync® Technology | |
| Dimensions W x D x H (mm) | 500 x 710 x 960 500 x 710 x 1230 500 x 710 x 1500 600 x 800 x 1876 | 15-20kVA (with internal battery) 30kVA (with internal battery) 40kVA (with internal battery) 60-200kVA |
| Cabinet rating | IP20 with standard washable dust filters | |
| Weights without internal battery | 72kg 120kg 202kg 245kg 283kg 311kg 457kg | 15/20kVA 40kVA 60kVA 80kVA 100kVA 120kVA 160/200kVA |
| Weights with internal battery | 272kg 376kg 490kg | 15/20kVA 30kVA 40kVA |
| Communications | ||
| Display | Graphical LCD with blue backlight | |
| LEDs | (4) LEDs for notice and alarm | |
| Audible alarms | Yes | |
| Communication ports | (1) RS-232, (1) USB, (1) EPO | |
| Communication slots | (2) Mini-slot communication bays | |
| Environmental | ||
| Operating temperature | 0ºC to +40ºC Batteries recommended max. +25ºC | |
| Storage temperature | -25ºC to +55ºC without batteries +15ºC to +25ºC with batteries | |
| Relative humidity | 5-95%, non-condensing | |
| Audible noise | 15-20kVA≤55 dBA at 1m typical 30-40kVA≤62 dBA at 1m typical 60-120kVA≤65 dBA at 1m typical 160-200kVA≤70 dBA at 1m typical | |
| Altitude | <1000m at +40°C | |
| Certifications | ||
| EMI standards | EN55022/EN55024 | |
| EMC compliance | IEC 62040-2 | |
| Quality | ISO 9001: 2000 and ISO 14001:1996 | |
| Communication accessories | ||
| Network-MS | Web/SNMP Card | |
| Modbus-MS | Web/SNMP and Modbus Card | |
| Relay-MS | Relay (Dry Contact) Card -DB9 Connection | |
| Industrial Relay | Relay (Dry Contact) Card -Terminal Connection | |
| 116750224-001 | Environmental Monitor Probe (EMP) kit (need to plug into Web/SNMP Card or Web/SNMP and Modbus Card to work | |
| System accessories | ||
| Battery cabinets & battery circuit breakers (60-200kVA) | ||
| Maintenance Bypass Switches (MBS) (100-200kVA, standard on 15-80kVA) | ||
| Top cable entry (60-200kVA) | ||
| System parallel modules (60-200kVA) | ||
| Dual input kit (15-80kVA) | ||
| IP21 hood (15-200kVA) | ||
| Rear chimney (60-200kVA) | ||
| Due to continuous product improvements, specifications are subject to change without notice. | ||
It’s time to think about our planet, go green
Libero gravida odio iaculis eros egestas primis semper sociosqu praesent elit ante